|Length:||1~9m||Design Using Life:||10 Years|
|Chain:||Hot Galvanizing Or Stainless Steel(304,316)||Material:||Natural Rubber,Natural Rubber + Nylon Cord|
|Application:||Docks,ships,Protect Ship From Collision,ship To Port||Standard:||ISO17357,CCS,BV|
Tugboat Docking Floating Pneumatic Fender,
Tugboat Docking Marine Dock Bumpers Fenders,
9m Marine Dock Floating Pneumatic Fender
Tugboat docking floating pneuamtic rubber fender , yokohama fender for sale
Pneumatic Rubber Fender also known as Pneumatic Marine rubber fender or Yokohama rubber fender, it is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship and ship or ship and dock. This kind of product can protect the ship or dock from the damage of collision.
Pneumatic rubber fender is the advanced anti-collision device for marine application in the world. It is made of synthetic nylon lines and compressed rubber sheet. With inner compressed air, it can float on the water and widely used as protecting medium. Pneumatic rubber fender can absorb large energy to lower the unit pressure which effect on the surface of the ship. It is usually used as an important protecting medium to prevent a collision in craft works and mooring works.
There are two basic types of pneumatic fenders that comply with the international standard: Type I (net type) and Type II (sling type). The most appropriate type for a given application will depend upon how it is to be used and what the requirements of the facility are.
Xincheng Type I fenders are fitted with a chain-tyre net (CTN). This is a lattice of used tyres connected by a network of horizontal and vertical chains,which adds further protection to the fender body.The chains are galvanised for greater corrosion resistance and covered by rubber sleeves to prevent abrasive damage to the outer rubber. The horizontal chains are fastened at each end to a ring shackle. CTNs are not available on fender sizes below 800 x1200 mm.
Type I fenders are the most common in use.
Sling or hook type fenders are effectively a Type I fender without the CTN and the ring shackles. A lifting eye is fitted to each end and the fender
is slung by chain or wire rope. Type II fenders are available across the whole size range.
Contact Person: Kate zhu