Yokohama Pneumatic Marine Fenders Low Reaction Force With Chain And Tyres

                Low Reaction Force Yokohama Pneumatic Fenders With Chain And Tyres

Pneumatic Rubber Fender also known as Pneumatic Marine rubber fender or Yokohama rubber fender, it is often installed on the terminal or ship, which aims to absorb or reduce the collision energy between ship and ship or ship and dock. This kind of product can protect the ship or dock from the damage of collision.

Pneumatic rubber fender is the advanced anti-collision device for marine application in the world. It is made of synthetic nylon lines and compressed rubber sheet. With inner compressed air, it can float on the water and widely used as protecting medium. Pneumatic rubber fender can absorb large energy to lower the unit pressure which effect on the surface of the ship. It is usually used as an important protecting medium to prevent a collision in craft works and mooring works.

The structure of Rubber Pneumatic Fenders:

1 Outer Rubber

Cover outside on the ball of rubber layer, which is used to protect skeleton material and inner rubber ball from damage of external force, the main features: high strength, wear resistance, ageing resistance and tear resistance.

2.Synthetic-tyre-cord layer for reinforcement

Reinforced cord rubber layer is composed of winding Synthetic cord layer, It is mainly used for maintain the internal air pressure, which has good elasticity, no deformation and high power etc.

3 Inner Rubber

On the ball inside the rubber layer, which is used to prevent air leakage and control the ball pressure.

4 Flange Opening

The metal parts at both ends of fender, to which an air valve or safety valve can be adapted.

NOTES OF PNEUMATIC RUBBER FENDERS

1 Keep the fender away from sharp objects, in case damage the fender body.

2 Fender cannot touch with acid, oil and other organic solvent.

3 When fender not use for a long time, they should be washed to clean, dried and proper compressed air inflated. Put them in a dry , cool and ventilated area.

4 The storage area should be far away from heat source.

5 Do not put heavy objects on the fender when fender not in use.

12.6 Fender in normal usages should be checked the inner pressure every 3 months. Meanwhile, Air valve core should be replaced every 6 months.

Pneumatic 50 fender size and performance requirements